WoundScribe AI
Share
X Facebook WhatsApp Email

How to Document a Diabetic Foot Ulcer Visit Step by Step

howto

Published

A plain walkthrough of what to record at a diabetic foot ulcer visit, from history and offloading status to measurements and plan, and where an AI draft can help.

Diabetic foot ulcer visits have a lot of required detail. This walkthrough covers what to capture, in the order most clinicians work, and where a drafted note can save time. Review every drafted field before you sign.

Before you start

  • Confirm the patient, the visit date, and the wound location
  • Pull up the last visit so you can compare against it
  • Have your measurement method ready, either photo-based or manual

Step 1: Record the history since the last visit

Note changes in pain, drainage, fever, glucose control, and footwear or offloading use. Keep it brief and specific.

Step 2: Describe the wound bed

Record tissue type, drainage amount and type, odor, and the condition of the surrounding skin. Plain terms are fine as long as they are consistent from visit to visit.

Step 3: Measure the wound

Capture length, width, and depth. A photo-based method such as point-and-capture measurement avoids retyping numbers by hand. For more on the imaging side, see AI-powered wound imaging.

Step 4: Document offloading and patient teaching

Record the offloading device, how well the patient is using it, and what you taught. If you need wording for the conversation, see this teach-back script for an offloading boot. More on this area is on the diabetic foot care page.

Step 5: Write the assessment and plan

State whether the wound is improving, stable, or worsening, and why. List the treatment performed and the next steps. A SOAP note draft can assemble these sections from what was said in the room.

Step 6: Review before signing

Check for missing fields, mismatched measurements, and anything the draft got wrong. A pre-sign review is a useful last pass.

Want to see how this fits your workflow? Chart one visit at WoundScribe AI.